Troubleshooting 188
Synapse Installation Guide
In single-zone paging, paging
starts on Desksets before the
paging starts on the OHP
system.
Paging delay is too short.
Verify that the Paging Delay is set to an appropriate
delay to work with your OHP system.
a. Log in to the WebUI as administrator, click
System Settings, then Overhead Paging.
b. Set the Paging Delay.
c. Click .
Symptom Probable Cause Corrective Action ATA Single-Zone OHP to AUX OUT Jack
Comments to this Manuals