AT&T SB67060 T1 Installation Guide Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Installation 34
Synapse Installation Guide
Other Preparations
Before installing the Gateway and Desksets, the following preparations may need to be taken:
All PSTN lines must be gathered into one access point situated no more than 9 feet (2.74 m) from the Gateway location.
If rewiring is required, contact your telephone service provider and request the help of a qualified technician.
You may need one or more network switches set up to ensure there are sufficient ports available for other devices in the
network (such as a DSL modem).
If you plan to use the emergency bypass feature on the PSTN Gateway, you will need an analog phone.
An Ethernet Port must be available within 9 feet (2.74 m) from each Deskset location. Each Deskset is capable of sharing
an Ethernet port with a PC. If one Ethernet port already exists at a workstation, another port is not necessary unless you
need a GigE Ethernet frame rate. Use a separate Ethernet connection for the Deskset and the computer.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 231 232

Comments to this Manuals

No comments