AT&T SB67060 T1 Installation Guide download pdf (Page 47)

Installation 46

Synapse Installation Guide

To attach the Desktop Stand for desktop installation:

Figure 26. Deskset Stand Options

Figure 27. Deskset Stand Installation

1. Select a Deskset position. The desktop setup requires the Deskset

Stand and provides two positions, Option 1 at 45° and Option 2 at

60°, as shown in Figure 26. If you use Option 2, rotate the Handset

tab as explained in “To rotate the Handset tab for wall and Deskset

Option 2 installation:” on page 47

2. Place the Deskset on a flat surface with the power and network ports

facing you, as illustrated in Figure 27.

3. Place the stand, illustrated

in Figure 28, on the base

with the flexible tab side

away from you.

4. Insert the solid tabs of the

stand into the Option 1 or

Option 2 slots on the base

that are marked in red in

Figure 27.

5. Rotate the stand away from you until it rests against the base and

you hear a click as the flexible tabs lock into place.

Option 1 Option 2

Option 1

Option 2

Flexible tabs

Solid tabs

Figure 28. Deskset Stand Tabs

Flexible Tabs

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 231 232

No comments

AT&T SB67060 T1 Installation Guide Page 47