AT&T SB67060 T1 Installation Guide Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
Installation 50
Synapse Installation Guide
To install the Deskset on a wall:
Figure 34. Deskset Wall Mount
1. Plug the Ethernet cable into the port on the back of the deskset. (See
“To connect the Cat.-5 LAN cable to the Deskset:” on page 48.)
2. Plug the power adapter into the jack on the back of the deskset. Skip
this step if using POE. (See “To connect power:” on page 49.)
3. Place the Deskset base over the mounting plate above the mounting
studs as shown in .
4. Slide the Deskset base down as shown in .
5. Plug the Ethernet cable into the wall jack.
6. Plug the power adapter into a power outlet not controlled by a wall
switch. Skip this step if using PoE.
7. Make sure the Handset Tab is in Wall position, as described in “To
rotate the Handset tab for wall and Deskset Option 2 installation:”
on page 47.
8. Connect the corded handset to the handset jack on the left side of
the telephone.
Wall-
Mount
Screws
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 231 232

Comments to this Manuals

No comments