AT&T SB67060 T1 Installation Guide download pdf (Page 26)

Installation 25

Synapse Installation Guide

Multi-Zone Paging

Broadcasts to speakers grouped into separate zones. Since the multi-zone OHP systems require zone selection, they cannot be

combined into one zone together with Synapse Desksets.

Multi-Zone OHP equipment connected to one of the FXS ports:

When paging is configured as a multi-zone OHP, a dedicated Overhead Paging zone automatically appears as the last entry in

the Deskset paging menu.

The OHP system may have settings that need to be adjusted to work with Synapse. Refer to your OHP system’s product

documentation for installation and configuration instructions.

Desksets and single-zone OHPs can be included in the same zone. In the case of a single-zone OHP connected to the

FXS port, this Paging System and the Desksets generate different paging tones. Note that users hear both tones at the

same time if the paging delay is set properly in the WebUI settings.

Overhead paging cannot be added to Synapse-specific paging zones (see “Multi-Zone Overhead Paging” on page 125)

because the multi-zone OHP cannot be paged together with Desksets.

Figure 11. Multiple-Zone Overhead Paging on FXS Port

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 231 232

No comments

AT&T SB67060 T1 Installation Guide Page 26