MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
T1/PRI Planner
Page D-7
D
4. If the type of service is PRI, complete the PRI Identification Service section
by doing
one
of the following:
■
If you are not planning to use the number identification service, check
the No box and proceed to Step 5.
■
If you are planning to use the identification services, check the Yes box
and check the service planned:
— For incoming calls, check one of the following boxes: ANI, SID, or
Both. If both automatic and extension identification service are
planned, indicate the order in which the information should be dis-
played (ANI then SID or SID then ANI).
— For outgoing calls, check either ANI, SID/ANI Privacy, SID—Exten-
sion Based, or SID—Line Based to indicate the service planned.
NOTE:
The availability of the caller identification information may be limited by lo-
cal-serving (caller’s) jurisdiction, availability, or central office equipment.
5. In the Channel Service Unit section:
a. Check the box that describes the channel service unit used. If you are
not using the model listed, check the second box and write in the manu-
facturer information that describes the unit.
b. Forward all copies of this page along with a copy of the Planner to Tier
III, GBS NTSC.
Comments to this Manuals