AT&T MERLIN LEGEND Communications System Key System Planning Forms Errata Instruction Manual Page 154

  • Download
  • Add to my manuals
  • Print
  • Page
    / 394
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 153
MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Features
Page 4-12Telephone and Extension Features
4
Alarm
Extension Status Off
Extension Status 1
Extension Status 2
Missed Reminder
Night Service
Operator Park
Send/Remove Message
Planning Form Instructions
1. On page 1 of Form 4a and/or Form 4c, write the extension number of the
Master Extension and the extensions to which this template will be copied.
2. Complete the Button Diagram on page 2 of Form 4a and/or Form 4c,
assigning features to the buttons.
3. On the individual telephone forms (Forms 4b, 4d, 4e, 5a, 5b and 5c) do the
following:
a. By the extension information at the top of each page, check Copied
from Master Extension No. and write the extension number of the
Master Extension.
b. Under every form’s Button Diagram heading, check the See Master
Extension box.
Cover Ring Delay 4
Beginning with Release 4.1, the following ring delay options can be programmed
for extensions:
The Group Coverage Ring Delay is programmed on individual sender
extensions and replaces the Coverage Delay Interval programmed on a
system-wide basis in previous releases.
When used in conjunction with Secondary Cover buttons, consider the
following when setting the value:
Secondary cover buttons are programmed for a sender, set the
value such that when the Group Coverage Ring Delay is added to
the Primary Cover Ring Delay, the result is greater than the
Secondary Ring Delay plus two rings (the fixed Secondary Cover
Delay Interval).
The Primary Cover Ring Delay and Secondary Cover Ring Delay are
programmed on individual sender extensions and replace the Delay Ring
Interval programmed on a system-wide basis.
Page view 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 393 394

Comments to this Manuals

No comments