AT&T MERLIN LEGEND Communications System Key System Planning Forms Errata Instruction Manual download pdf (Page 180)

MERLIN LEGEND Communications System Release 5.0

System Planning

555-650-112

Issue 1

June 1997

Features

Page 4-38System Features

Automatic Callback 4

This section contains instructions for setting the number of rings the system

should use to alert a caller about a callback attempt. After the specified number of

rings, the system abandons the callback attempt.

Planning Form Instructions

Under the Automatic Callback Interval heading on Form 8a, do

one

of the

following:

■ To keep the factory-set interval, check the 3 rings box.

■ To change the factory-set interval, check the second box and write the

number of rings (1 through 6) in the space provided.

Extension Status 4

This section contains instructions to set Extension Status to allow an operator, a

calling group supervisor, or a Call Management System (CMS) supervisor to

determine the status of a telephone at a glance. The lights next to the buttons on

a DSS or next to Auto Dial buttons programmed with extension numbers indicate

the status of the telephone.

Decide on the configuration and assign operator positions to monitor extension

status.

Planning Form Instructions

Under the Extension Status heading on Form 8a:

1. Check the Assign to operator positions box and write the extension number

for each operator position in the space provided (see the appropriate copy

of Form 5a, 5b, or 5d).

2. Do

one

of the following:

■ To keep the factory-set configuration, check the Group Calling/CMS

box.

■ To change the configuration, check the Hotel box.

SMDR (Station Message Detail Recording) 4

Use these instructions only if connecting a Station Message Detail Recording

(SMDR) device. Otherwise, skip to the next section, ‘‘

Inside Dial Tone’’.

This section contains instructions for setting up SMDR to keep track of telephone

usage. SMDR works in conjunction with the Call Accounting System (Intuity CAS,

Windows CAS, IS CAS, CAS Plus V3, and MERLIN LEGEND Reporter) or a

serial printer connected to the SMDR port on the control unit. The SMDR port is

the upper RJ-45 jack on the processor module.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 393 394

Comments to this Manuals

No comments

AT&T MERLIN LEGEND Communications System Key System Planning Forms Errata Instruction Manual Page 180

Comments to this Manuals

Related products and manuals for Telephones AT&T MERLIN LEGEND Communications System Key System Planning Forms Errata