AT&T MDC 9000 Specifications download pdf (Page 235)

■ To make a voice-signaled transfer to a system phone, in Step 2 of the

procedure on the previous page press [

★

] plus the two-digit extension

number, Then listen for one of the following responses:

If you hear one beep, you have reached an idle system phone. You can

speak after the beep.

Your voice is heard through the other extension’s speaker. If no one

answers or the call is refused, press the line button next to the winking

green light to reconnect to the caller. If the call is accepted, hang up.

If you hear two beeps, you have reached a busy system phone with

Voice Interrupt On Busy Assigned. You can speak after the beeps.

Your voice is heard through the recipient’s handset or speaker. Be

aware that the third party to whom the recipient is speaking probably

also will hear the two beeps and the faint sound of your voice. Be brief

and discreet in your interruption. If the recipient has a Voice Interrupt On

Busy Talk-Back button, wait for a response. If the call is accepted, hang

up to complete the transfer. The call rings at the recipient’s extension. If

the call is refused, press the line button next to the winking green light to

reconnect to the caller.

If you hear ringing, you have reached a standard phone, an idle MDC

9000 or MDW 9000 phone, or a busy system phone with Voice Interrupt

On Busy Not Assigned.

When someone answers, announce the call, then hang up. If no one

answers or the call is refused, press the line button next to the winking

green light to reconnect to the caller.

■ To transfer a call with one button touch:

While on a call, press the Auto Dial button programmed for the extension, or

the Hunt Group or Calling Group button for the group, to which you want to

transfer the call. (There is no need to press [

Transfr

] or [

Next Item

]; this takes the

place of Steps 1 and 2 in the procedure on the previous page.)

For an extension that has a system phone, you can program [

★

] plus the

extension number on the Auto Dial button, so you can announce the calls

when you transfer them.

Transferring Calls 5-147

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 304 305

No comments

AT&T MDC 9000 Specifications Page 235