AT&T MLC-6 Instruction Manual download pdf (Page 48)

System Programming Reference

System Programming changes settings for the system as a whole, or for individual lines or extensions. You can also use System

Programming to set up dialing restrictions, define groups, and set up optional equipment.

Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING TO USE A SPECIFIC PROCEDURE

TO CYCLE THROUGH AVAILABLE

PRESS [

Feature

] [

]

DIAL [ # ] and the three-digit procedure code

SETTINGS

PRESS [

System Program

]

Example: [

] [

] for System Date

PRESS [

Next Data

] or [

Prev Data

]

PRESS [

System Program

]

TO CYCLE THROUGH SYSTEM PROGRAMMING

TO RETURN TO FACTORY SETTING

PROCEDURES

PRESS [

Remove

]

TO END SYSTEM PROGRAMMING

PRESS [

Next Procedure

] or [

Prev Procedure

]

PRESS [

Feature

] [

]

NOTE: Procedures #399, #609, and #728—shown

below in dashed boxes—are skipped when cycling

SYSTEM

SYSTEM DATE

Sets the month, day, and year to appear on

system display phones (MLS-34D and

MLS-12D). Include leading zeroes for

single-digit months or days (for example,

January 3, 1992, is entered as 010392).

DIAL #101

DIAL the date in MMDDYY form

DIAL #108

SYSTEM DAY

Sets the day of the week to appear on

system display phones (MLS-34D and

MLS-12D).

DIAL #102

DIAL

1 = Sunday ✔

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

SYSTEM TIME

Sets the time to appear on system display

phones (MLS-34D and MLS-12D). Enter

four digits in 24-hour military notation, from

0000 for 12 midnight to 2359 for 11:59 p.m.

(for example, 8:15 a.m. = 0815). System

displays times as a.m. or p.m.

DlAL #103

DIAL the time in HHMM form

TRANSFER RETURN RINGS

ROTARY DIALING TIMEOUT

For all system extensions, defines the

Change the factory setting only if you

number of times transferred calls ring

have trouble calling out on rotary lines

before returning to the extension that

with standard touch-tone phones. (For

transferred the call (or to a programmed

Transfer Return Extension, #306).

example, if users dial slowly and calls are

not completed or are connected to wrong

NOTE: For fax, answering machine, or

numbers, lengthen the timeout.) Use only

auto attendant extensions, set this

if the Dial Mode (#201) for at least one line

is set to “rotary.”

number to be greater than the ring delay

for the device, to prevent calls from being

returned before the device answers.

DIAL

1 = 4 seconds

DIAL #105

2 = 8 seconds ✔

DIAL one digit for the number of rings

3 = 12 seconds

before the call returns (0 to 9)

✔

= 4 rings

0 rings = no return

OUTSIDE CONFERENCE

Determines whether users can include

more than one outside party in a confer-

ence call (affects all system users).

RECALL TIMER DURATION

DIAL #109

The Recall feature sends a timed signal

(switchhook flash) to your local phone

DIAL

1 = Allowed ✔

company. This setting changes the length

2 = Disallowed

of the signal in 25-millisecond (msec)

increments. (For example, 01 = 25 msec,

SYSTEM RESET – PROGRAMMING

80 = 2000 msec.)

SAVED

if:

Factory setting is correct for most PBX

systems. Change the factory setting only

IMPORTANT: Using this procedure

disconnects any active calls but retains

●

using Recall drops calls (shorten the

system settings. Use it only if the system

time).

fails to function correctly after a power

failure or down period.

using Recall has no effect—i.e., no

●

dial tone (lengthen the time).

DIAL #728

DIAL #107

NUMBER OF LINES

Use only when first setting up the system,

to assign the same number of outside

lines to all extensions. (For example,

entering 06 means that all extensions are

assigned lines 1–6.)

DIAL #104

DIAL two digits for the number of outside

lines in the system (01 to 24)

✔ 2 per 206 module plus 4 per 400

module

IMPORTANT: Do not use this

procedure if you add lines to the system

after initial setup because it changes

Line Access Restriction (#302),

Automatic Line Selection, Line Ringing,

and Hold Disconnect Time (#203) for

existing lines lines back to factory

settings. To change line assignments

without affecting other settings, use Line

Assignment (#301).

DIAL two digits to set the length of a

switchook flash (01 to 80)

✔

= 18 (450 msec)

✔ = Factory Setting

3-16 Programming

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 128 129

Comments to this Manuals

No comments

AT&T MLC-6 Instruction Manual Page 48

Comments to this Manuals

Related products and manuals for Telephones AT&T MLC-6