AT&T MLC-6 Instruction Manual download pdf (Page 50)

System Programming Reference

System Programming changes settings for the system as a whole, or for individual lines or extensions. You can also use System

Programming to set up dialing restrictions, define groups, and set up optional equipment.

Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING

TO USE A SPECIFIC PROCEDURE

TO CYCLE THROUGH AVAILABLE

PRESS [

Feature

] [

]

DIAL [ # ] and the three-digit procedure code

SETTINGS

PRESS [

System Program

]

Example: [

] [

] for System Date

PRESS [

Next Data

] or [

Prev Data

]

PRESS [

System Program

]

TO CYCLE THROUGH SYSTEM PROGRAMMING

TO RETURN TO FACTORY SETTING

PROCEDURES

PRESS [

Remove

]

TO END SYSTEM PROGRAMMING

PRESS [

Next Procedure

] or [

Prev Procedure

]

PRESS [

Feature

] [

]

NOTE: Procedures #399, #609, and #728—shown

below in dashed boxes—are skipped when cycling

DIALING RESTRICTIONS AND PERMISSIONS

OUTGOING CALL RESTRICTION

DISALLOWED PHONE NUMBER LISTS

EMERGENCY PHONE NUMBER LIST

Restricts calling on all lines at an extension.

Creates up to 4 lists of telephone numbers

Creates a list of up to 10 telephone

NOTE: Emergency numbers, Marked

numbers that all users can dial regardless

that users cannot dial (up to 10 numbers per

System Speed Dial numbers, and Allowed

of dialing restrictions.

list). Use proacedure #405 to assign lists to

List numbers override call restrictions; a

extensions.

DIAL #406

user can also enter the system password to

DIAL #404

DIAL a list entry (01 to 10)

override restrictions.

DIAL a list number (1 to 4)

DIAL #401

DIAL a list entry (01 to 10)

To add entry:

DIAL an extension number

DIAL the telephone number (up to 12

DIAL

1 = No Restriction ✔

To add entry:

digits)

2 = Inside (intercom) Only

DIAL the phone number (up to 12 digits)

PRESS [

Enter

]

3 = Local (intercom and local) Only

PRESS [

Enter

]

NOTE: For instructions on entering phone

PRESS [

Next Item

] to program another extension

NOTE: For instructions on entering phone

numbers, see “Entering Telephone

numbers, see "Entering Telephone Numbers

Numbers in Lists” (see box, bottom left).

TOLL CALL PREFIX

in Lists" (see box, bottom left).

PRESS [

Remove

] to remove a list entry

Indicates whether users must dial a 0 or 1

PRESS [

Remove

] to remove a list entry

to make a long-distance call

PRESS [

Next Item

] to program another list

PRESS [

Next Item

] to select another list entry

entry

DIAL #402

DIAL

1 = 0/1 plus Area Code and

To program another list:

ALLOWED PHONE NUMBER LISTS

Number ✔

PRESS [

Next Procedure

] [

Prev Procedure

], enter a new

Creates up to 4 lists of telephone numbers

2 = Area Code and Number Only

list number, and repeat above steps

that users can dial regardless of dialing

restrictions (up to 10 numbers per list). Lists

SYSTEM PASSWORD

DISALLOWED LIST ASSIGNMENT

must also be assigned to extensions using

Defines a 4-digit password. Users can

Assigns one or Disallowed Lists to an

procedure #408.

enter it to override dialing restrictions. If a

extension.

password is defined, users in the Night

DIAL #405

DIAL #407

Service Group must enter it to make

DIAL a list number (1 to 4)

DIAL an extension number

outgoing calls (other than Emergency

DIAL a list entry (01 to 10)

DIAL a list number

numbers and Marked System Speed Dial

numbers) when Night Service is on.

DIAL

1 = Assigned

To add entry:

2 = Not Assigned ✔

DIAL #403

DIAL the telephone number (up to 12

PRESS [

Next Item

] to program another list

digits)

DIAL 4 digits to set the password

To program another extension:

PRESS [

Enter

]

PRESS [

Next Procedure

] [

Prev Procedure

], enter a

NOTE: For instructions on entering phone

new extension number, and repeat above

numbers, see “Entering Telephone

✔ = Factory Setting

steps

Numbers in Lists” (see box, bottom left).

PRESS [

Remove

] to remove a list entry

Entering Telephone Numbers in Lists

PRESS [

Next Item

] to select another list entry

TYPE OF TELEPHONE

LIST ENTRIES REQUIRED

To program another list:

NUMBER(S)

. . . if you dial 0 or 1

. . . if you just dial

PRESS [

Next Procedure

] [

Prev Procedure

], enter a

for long distance calls

area code and number

new list number, and repeat above

Full Telephone Number

555-5678

steps

Examples: 555-5678

411 411

411

ALLOWED LIST ASSIGNMENT

All Numbers in an Area Code 1900 900

Assigns one or more Allowed Lists to an

Example: 900 numbers

0900 0900

extension.

All Numbers in an Exchange 976 976

DIAL #408

Example: 976 exchange

1!0!976

!0!976

DIAL an extension number

1!1!976

!1!976

DIAL a list number

see note below)

0!0!976

1 = Assigned

0!1!976

1976

2 = Not Assigned ✔

0976

PRESS [

Next Item

] to select another list

International Numbers

011 011

To program another extension:

(011 prefix)

PRESS [

Next Procedure

] [

Prev Procedure

], enter a

NOTE: You can enter the wild card character ! by pressing Wild (the [ Hold ] button on

new extension number, and repeat

your system phone) This character represents any single character in a phone number.

above steps

(! = wild card,

3-18 Programming

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 128 129

Comments to this Manuals

No comments

AT&T MLC-6 Instruction Manual Page 50

Comments to this Manuals

Related products and manuals for Telephones AT&T MLC-6