AT&T SB35020 Specifications download pdf (Page 80)

Syn248 Installation and Configuration Guide Back to Contents

Device Configuration 79

Setting Intercom Call Forward–No Answer

Intercom Call Forward–No Answer is an administrator setting to handle unanswered

Intercom calls for each Deskset, including outside calls that have been routed to a

Deskset by a Phone Line Call Forward–No Answer setting. See “Configuring Phone Line

CFNA” on page 41.

By default, Intercom calls are forwarded to Voicemail after they ring for 15 seconds. You

can change the target destination to another extension or to an outside phone number,

or you can turn off call forwarding when there is no answer. You can adjust the delay

from 5 to 45 seconds.

To set up Intercom Call Forward–No Answer:

1. On the Admin Settings menu, press 1 to display the Intercom CFNA settings.

2. Press

 or  to select a target:

 Mailbox.

 Ext. Then press  and enter a valid extension in the to Ext: field.

 Phone#. Then press  and enter a valid phone number. Before you can save

this setting, “Fwd/Trans to Outside Line” must be enabled.

 OFF. Calls will not be forwarded. Go to Step 5.

3. Press

 to highlight the Delay before forwarding.

4. Press

 or  to adjust the delay time in five-second increments.

5. Press to accept the change and display the Admin Settings menu.

Calls forwarded to outside lines use two telephone lines. You can limit the

duration of calls forwarded to outside lines with the Timer for Forwarded and

Transferred Outside Calls setting. See “Changing the System Basic Settings”

on page 30.

You can also disable Fwd / Trans to Outside Line individually for each

extension. See “Fwd/Trans to Outside Line” on page 80. If Fwd / Trans to

Outside Line is disabled, you cannot change the target destination to an

outside phone number.

IQtercom CFNA

UJHW0DLOER[

'HOD\

>VHF@

Save

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

No comments

AT&T SB35020 Specifications Page 80