AT&T SB35020 Specifications download pdf (Page 16)

Syn248 Installation and Configuration Guide Back to Contents

Installation 15

Gateway Placement

You can place the Gateway on a tabletop, mount it into a standard 19-inch metal rack,

or wall mount it. The Gateway must be installed within three feet of the building ground

point. Install each device using the following instructions.

Rack Mounting

To mount the Gateway into a standard 19-inch rack:

1. Remove the two mounting brackets and six screws from the packing tissue.

2. Position a bracket at the front of the device.

3. To align the screw holes, place the bracket on the device so that the locating indent

on the bracket matches the indent on the device.

4. Insert each of the three screws into the holes provided and tighten securely. Repeat

the process for the other bracket.

5. Position the chassis into the rack.

Locating Indent

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 115 116

No comments

AT&T SB35020 Specifications Page 16