AT&T 2820 Instruction Manual download pdf (Page 68)

DV MODE OPERATION (Optional UT-123 is required)

■ Received call sign

When a call is received in DV mode, the calling station and

the repeater call signs being used can be stored into the re-

ceived call record. The stored call signs are viewable in the

following manner.

Up to 20 calls can be recorded.

Desired call record indication

qDisplay the RX call sign record screen;

Accessing from MENU screen:

zPush [F•]to display the function guide.

xPush [MENU](V/MHz•SCAN)

(Right band’s) to display the

“MENU” screen.

cRotate [DIAL] to select “RX CALL SIGN,” then push

[MAIN•BAND].

Accessing from function guide 2:

zPush [F•]twice to display the function guide 2.

xPush [CD](M/CALL•MW)

(Left band’s) to display the “RX

CALL SIGN” screen.

wRotate [DIAL] to select the desired record.

ePush [MAIN•BAND] to display the received call details.

• CALLER : The station call sign that made a call.

• CALLED : The station call sign called by the caller.

• RXRPT1 : The repeater call sign used by the caller station.

• RXRPT2 : The repeater call sign linked from RXRPT1.

*The above screen is displayed when accessing the RX CALL

SIGN screen from function guide 2. A different screen is displayed

when accessing the screen from MENU screen.

rPush [MAIN•BAND] or [BACK](V/MHz•SCAN) (Right

band’s) to return to the “RX CALL SIGN” screen.

tPush [BACK](V/MHz•SCAN)

(Right band’s) to exit from the

“RX CALL SIGN” screen.

✔

For your information

When receiving a call, the received station call sign is auto-

matically displayed at the bottom line of the function display.

This can be turned ON in display set mode. (p.106)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 163 164

No comments

AT&T 2820 Instruction Manual Page 68