34
4
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Offset frequency
When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by an amount
determined by the offset frequency.
Independent offset frequencies can be set for each operating
frequency band.
qPush [MAIN•BAND] to select the desired band
(left or right)
as the main band.
wSelect the desired mode/channel you wish to set the offset
frequency for, such as VFO mode or memory/call channel.
ePush [F•]to display the function guide then push
[MENU](V/MHz•SCAN)
(Right band’s) to enter MENU
screen.
rRotate [DIAL] to select
“DUP/TONE…”, then push
[MAIN•BAND].
tRotate [DIAL] to select “OFFSET FREQ” item, then push
[MAIN•BAND].
yRotate [DIAL] to set the desired offset frequency.
• Push [MHz](V/MHz•SCAN) (Left band’s) to turn 1 MHz tuning
ON and OFF
uPush [BACK](V/MHz•SCAN) (Right band’s) twice to exit
DUP/TONE set mode.
z Push [BAND] to select the desired band
(left or
right) as the main band.
• Enter the desired frequency via the keypad if neces-
sary.
x Select the desired mode/channel you wish to
set the offset frequency for, such as VFO mode
or memory/call channel.
• The offset frequency can be independently pro-
grammed into each mode or channel.
c
Push [
SET
B(D-OFF)] to enter MENU screen.
v
Push
[Y] or [Z] to select “DUP/TONE…” then
push
[
SET
B(D-OFF)].
b
Push
[Y] or [Z] to select “OFFSET FREQ” then
push
[
SET
B(D-OFF)].
n Push [Y] or [Z] to set the desired
offset.
• Direct frequency entry from the keypad is not possi-
ble.
m Push [
CLR
A(MW)] to exit set mode.
NOTE: The offset frequency can be set in a
memory/call channel temporarily. However, the
set frequency is cleared once another memory
channel or VFO mode is selected. To store the
offset frequency permanently, overwrite the
channel information.
Comments to this Manuals