AT&T System 75 8520T User Manual download pdf (Page 51)

Programming the System

G-

(.

!

Introduction

There are a great number of instructions that

define how the Security System 8300 operates

and responds to its different sensors. They are

contained in the

CCU’s

programs

The Programming List in this section of the

manual contains all of the commands that you can

use to control the operation for each specific

installation. You can change as many, or as few,

of these settings as you need. For those that you

don’t change, the system will use the default

factory settings.

Those default factory settings were designed for

typical situations, so that you wouldn’t have to

make many changes. They are shown in the List

by underlining.

A UL Programming table at the end of Chapter 3

shows UL requirements for various program

settings.

To change the programs from their default set-

tings, you can use either of two methods. You can

use the display keypad to select each Function

Number you want to change, and make the

desired changes. Or you can use the optional

program CCUBOSS to make, save, print, and

restore complete settings with a PC, much faster

than you can enter the commands using the

keypad. With CCUBOSS you can even program

the system remotely, using a computer and

modem. Either method of programming requires

the correct access code.

Be sure to check the default settings before you

begin programming; by assigning sensor num-

bers thoughtfully and making notes of which

defaults need changing, you can decrease the

amount of time spent programming.

Programming

Lists

To be most helpful, we have provided two Pro-

gramming Lists. The “Long” Programming List

shows each option (Function Number) and the

possible selections that you can make for it. The

list is “Long” because it has many discussions or

explanations to help you get started. You can use

it when programming either manually or with

CCUBOSS.

AT&T Security System 8300 Installer’s Manual

3-1

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 114 115

Comments to this Manuals

No comments