AT&T E2812B ATT-E2812B User Manual download pdf (Page 10)

Getting started

INT

Low battery indicator

Return the handset to the telephone

base or charger to recharge when

this symbol flashes. (Handset will

beep when battery is low.)

To replace the battery, press in

and downward on the tab of the

battery compartment cover to

open the battery compartment

cover. Lift out the old battery and

disconnect it from the handset.

Follow the instructions on this

page to install and charge the

new battery.

LOW BATTERY

Caution: Use only the supplied rechargeable battery or replacement battery (model 27910, part number

89-0099-00-00) or equivalent. To order a replacement battery, visit our website

at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial

1 (866) 288-4268.

NOTE: Under normal

conditions, the battery

should last around one

year. This may vary

depending on usage.

Battery installation & charging

After installing the battery, you may be able to make and receive short calls.

For best performance, place the handsets in the telephone base or the charg-

er and charge for 16 hours before use.

You can keep the battery charged by returning the handsets to the telephone

base or the charger after use. When the battery is fully depleted, a recharge

takes about 12 hours. The average talk time on a fully charged battery is

about eight hours, and the standby time is approximately five days. Actual

battery life depends on usage conditions and age of battery.

3. Insert the plug as indi-

cated. Be sure to securely

insert the plug, making sure

it matches the color-coded

label inside the battery com-

partment.

5. Slide the battery

compartment cover

up until it clicks.

4. Place the bat-

tery and wires

inside the com-

partment.

1. Plug the small end of

the power adapter for

handset charger into the

jack on the underside of

the charger, then route

the cord through the slot

as shown.

2. Plug the large end

of the power adapter

for handset charger

into an electrical out-

let not controlled by a

wall switch.

6. You may be able to make and receive

short calls. For best performance, place

the handset in the telephone base or

charger to charge for at least 16 hours

before first use.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 68 69

Comments to this Manuals

No comments

AT&T E2812B ATT-E2812B User Manual Page 10

Comments to this Manuals

Related products and manuals for Answering machines AT&T E2812B ATT-E2812B