AT&T 905 User Manual download pdf (Page 6)

IN CASE OF DIFFICULTY

If this telephone does not work

properly, try the following

suggestions before seeking repair

assistance.

No Dial Tone

• Make sure all plugs are connected

properly. Inspect the line cord

connections at the modular jack

and at the telephone. Also inspect

the coiled handset cord connection

at both ends.

• Unplug the telephone and connect

it to another modular jack. If it

still does not work, and other

telephones in your home are

working, the problem is with this

telephone.

Call Cannot Be Dialed Or Is

Dialed Slowly

• Reset the Dial Mode switch. Make

sure you choose the correct dialing

method; touch tone dialing will

not work if you have dial pulse

(rotary) service.

• See “Installation” to select the

correct dial mode. If you have

pulse dialing service, you cannot

dial numbers with the telephone

set in the touch-tone mode.

• If you just used Temporary Tone,

leave the handset on the base for

a few seconds before making

another call.

Telephone Does Not Ring

• Make sure the RINGER switch is

set in the LO or HI position.

• If there are several other

telephones on the same line, try

disconnecting some of the other

telephones. Having too many

telephones connected can also

create problems such as low ringer

volume, or impaired sound quality

during calls.

Difficulty Storing Numbers In

Memory

• Review “One-Touch Dialing” and

“Speed Dialing” to make sure you

are pressing the correct sequence

of buttons.

• If you are interrupted by a

recorded announcement telling

you to hang up (or a loud buzzing

noise), hang up and try to enter the

number more quickly.

• Try calling the number you want

to store into memory. When a call

is ended, press ,

and a memory button (or press

and a memory location

1-9).

• If someone lifts an extension

phone while you are storing

numbers in memory, programming

might be interrupted. Make sure

all extensions are on hook while

storing numbers in memory.

• You might not hear the

confirmation beep if the

RECEIVER (handset) volume is

set too low, or if you are in a noisy

location.

• If the number is more than 24

digits long, make sure you follow

the directions for “Dialing Long

Numbers.”

Other Problems

Make sure you have followed all

the instructions in this booklet. If

you continue to have problems,

call 1 800 222-3111.

MEMORY

REDIALPROGRAM

5

1 2 3 4 5 6

Comments to this Manuals

No comments