AT&T 1145 Specifications Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Page 1 of 7
S1145B Battery Pack Operation Manual
Description
The S1145B is an improved direct replacement for the following Lucent/ATT ISDN
battery packs: 1147B1, 1148B1, 1149B1, and KS-21906. Features include 8 amp hour
battery capacity and compatibility with the existing wall mounting plate and connection
wiring.
The S1145B Battery Pack’s microprocessor-based controller monitors charge status and
automatically performs a periodic battery test to guarantee the holdover capability of the
pack. A Manual Battery Test Switch is also provided. The S1145B Battery Pack
provides LED indicators of the Battery Charge Status and the Battery Test Status.
The S1145B Battery Pack contains four 12 volt, 8 Amp-hour, sealed lead acid batteries,
connected in series to provide a nominal 48 Vdc. A panel-mounted fuse protects the
output.
Technical Specifications
Electrical Environmental
Nominal Output Voltage: 48 Vdc
Maximum Output Current: 6.00 A
Recommended Charge Voltage:54.0-56.4 Vdc
Rated Capacity: 8 Amp-hours @ C/20
Temperature: -20°C to +40°C
Humidity: 95% non-condensing
Optimum battery life will be achieved if the
unit is operated at a temperature of 25°C.
LED Indicators User Interface
Battery Charge Status:
Constant Green – Fully Charged
Flashing Green – Charging
Constant Red – Power Unit Fault
Battery Test Status:
Constant Green – Battery Good
Fast Flash Red – Wait, Then Test
Slow Flash Red – Replace Battery
Manual Battery Test Switch –Push to Test
NOTE: The Manual Battery Test switch is
disabled when the battery is charging. Also,
to prevent unnecessary battery discharge, the
Manual Battery Test is disabled for 5 minutes
following a Battery Test. In both cases, the
Wait, Then Test indication is displayed.
Fuse Replacement
3AG Fast-Acting 250V, 6.0A, Littlefuse Part Number 312 006 or Equivalent
CAUTION: For continued protection against risk of fire, replace only with the same
type and rating of fuse.
Page view 1
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments