AT&T 8403 User's Guide download pdf (Page 38)

Labeling the Designation Card

The designation card is a removable card placed behind a transparent protective

cover on which the user can type or print call appearance or feature

assignments. In most cases, the voice terminal’s designation card is filled out

before the user begins to use the set. Do not discard the blank button

designation card. Instead, if there is a preprinted designation card, place it over

the blank button designation card which comes with the voice terminal. The blank

designation card can then be used as a substitute if, in the future, there are

changes in features, telephone numbers, or extension assignments on the voice

terminal.

The following information describes the designation card(s) for each voice

terminal and explains how the cards are to be filled out, if necessary, and

reinstalled under the plastic cover.

For the 8403 Voice Terminal

The designation card for the 8403 voice terminal consists of two sections:

The Feature Directory section — Provides a convenient quick reference

list for 12 features. (These features can be accessed by pressing

Feature

and then entering the number assigned to the feature, 1 through 9, or 0,

or the character ∗ or #.) The system manager or user can print the name

of the feature next to F1 through F9, F∗, F0 and F#.

The Call Appearance section — Sections a, b, and c are provided for

noting the telephone number or extension of your voice terminal.

To label the card, use the instructions under ‘‘How to Label the Blank

Designation Card’’ later in this section.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 86 87

No comments

AT&T 8403 User's Guide Page 38