AT&T TL7610 User Manual download pdf (Page 24)

Troubleshooting

• First try all the suggestions above.

• Make sure you have a dial tone before

dialing. The corded handset or headset. The corded handset or headset

may take a second or two to find the

telephone base and produce a dial tone.

This is normal. Wait an extra second

before dialing.

• Make sure LIFTER MODE is selected on

the headset base.

• Make sure that the ALERT ON/OFF on

the lifter is on. If the ALERT ON/OFF

is off, there are no call alert tones in the

headset.

• If the speaker of your corded phone is

not located under the lifter, install the

optional external ring detector. See page

11 for instructions.

• It may be necessary to adjust the

sensitivity of the ring detector. See page

12 for instructions.

• If used, make sure the external ring

detector is pushed all the way into the

plug on the handset lifter.

• Make sure all cords and the telephone

line cord are plugged into the appropriate

outlets.

• Make sure your headset is charged.

My corded

phone is ringing,

but I do not hear

the call alert

tone.

I cannot dial out

in LIFTER MODE.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 32 33

No comments

AT&T TL7610 User Manual Page 24